Ungakusebenzisa kanjani ukubonisa kwe-LED

OkukhuluIsibonisi se-LED screens are the same as traditional electronic products. Not only do you need to pay attention to the method during use, but also need to maintain the display screen in order to make the life of the large Isibonisi se-LED screen longer. Here, Changcai Electronics will analyze several ways to maintain the large screen of LED full-color display for everyone.
1. Gcina umswakama wemvelo lapho umbala ogcweleIsibonisi se-LED is used, and do not let anything with moisture into the full-color Isibonisi se-LED. Powering on a full-color display that contains humidity will cause corrosion of the components of the full-color display, resulting in permanent damage.
2.Ukugwema izinkinga ezingase uhlangane nazo, singakhetha ukuvikela ngokungenziwanga nokuvikelwa okusebenzayo, zama ukugcina izinto ezingadala ukulimala esikrinini sokubonisa okugcwele kude nesikrini, futhi lapho uhlanza isikrini, sisule njengobumnene ngangokunokwenzeka ukugwema umonakalo. Ithuba lincishisiwe.
3. Isikrini esikhulu sesibonisi esigcwele sombala we-LED sinobuhlobo obuseduze kakhulu nabasebenzisi bethu, futhi kuyadingeka kakhulu ukwenza umsebenzi omuhle wokuhlanza nokunakekela. Ukuchayeka isikhathi eside ezindaweni ezingaphandle njengomoya, ilanga, uthuli, njll kuzoba lula ukungcola. Ngemuva kwesikhathi, isikrini sizobe sesinothuli. Lokhu kudinga ukuhlanzwa ngesikhathi ukuvimbela uthuli ekugoqeni ingaphezulu isikhathi eside ukuthinta umphumela wokubuka.
4. Kuyadingeka ukuthi ugesi uzinze futhi ukuvikelwa komhlaba kuhle. Ungayisebenzisi ngaphansi kwezimo ezinzima zemvelo, ikakhulukazi ukuduma okunamandla nombani.
5. Akuvunyelwe neze ukungena emanzini, i-iron powder nezinye izinto zensimbi ezisebenza kalula esikrinini. ElikhuluIsibonisi se-LED screen should be placed in a low-dust environment as much as possible. Okukhuludust will affect the display effect, and too much dust will cause damage to the circuit. If water enters due to various reasons, please cut off the power immediately and contact the maintenance personnel until the display panel in the screen is dry before use.
6. The switch sequence of the Isibonisi se-LED: A: First turn on the control computer to make it run normally, then turn on the large Isibonisi se-LED; B: Turn off the Isibonisi se-LED first, then turn off the computer.
7. Ungahlali kumhlophe okuphelele, ubomvu obugcwele, okuluhlaza okugcwele, okuluhlaza okwesibhakabhaka okugcwele, njll. Isikhathi eside ngesikhathi sokudlala, ukuze uvikele ukwanda ngokweqile kwamanje, ukushisa ngokweqile kwentambo yamandla, ukulimala kwelambu le-LED, futhi kuthinte impilo yenkonzo yesiboniso. Musa ukuqaqa noma ukuhlukanisa isikrini ngokuthanda kwakho!
8. Kunconywa ukuthi isikrini esikhulu se-LED sibe nesikhathi sokuphumula esingaphezu kwamahora ama-2 ngosuku, futhi isikrini esikhulu se-LED kufanele sisetshenziswe okungenani kanye ngesonto ngenkathi yemvula. Ngokuvamile, vula isikrini okungenani kanye ngenyanga bese usikhanyisa amahora angaphezu kwangu-2.
9. The surface of the large screen of the Isibonisi se-LED can be wiped with alcohol, or use a brush or vacuum cleaner to remove dust. It cannot be wiped directly with a damp cloth.
10. The large Isibonisi se-LED screen needs to be checked regularly for normal operation and whether the circuit is damaged. If it does not work, it should be replaced in time, and the circuit should be repaired or replaced in time if it is damaged. Non-professionals are forbidden to touch the internal wiring of the Isibonisi se-LED to avoid electric shock or damage to the wiring; if there is a problem, please professionally repair it.